For many discerning men, it's not enough to just have a watch case for our finest jewelry. Today's most extravagant timepieces come equipped with automatic movement. That means they never need batteries and never need to be wound by hand. They're powered by the kinetic movement of your body when you wear them. But what if you have different watches for different occasions? Chances are some will stop from extended periods of non use. Our specially designed automatic winding case will keep your favorite watches wound and ready for when you need them. A silent motor keeps the watches moving on dual turntables nestled beneath a see-thru lid.

The case is handcrafted of lacquered hardwood veneer. 8 layers of high-gloss lacquer are applied, with each layer of lacquer allowed to cure for 3 days before being sanded and polished by hand. The entire process requires nearly 30 days, creating a high gloss piano finish. But then again perfect doesn't come over night. The interior is lined with smooth cream faux newborn calf-hide. A luxury befitting a collection of timepieces worth displaying.

A bottom drawer adorned with a polished brass knob pulls out to reveal 7 more watch compartments and one jewelry compartment for cufflinks and rings. The jewelry compartment has 12 slots for rings, cufflinks, etc. Black lacquer with dual watch winders able to hold 4 watches with direction reversing capability and intermittent timer.

Simply stated, these are the watch cases no discerning timepiece collector should be without. Watches not included.

Operation Instructions:
1. Starting up operation: Check if the clamp is put on and the screw on the clamp is tightened. One or two watches are fixed on the clamp. In order to prolong the working life of motor and batteries two watches should be fastened on the clamp for counterweight reasons in case of heavy watches.

2. Functions: The switch features two possible settings enable cyclic operation and continuous operation.

2.1. Cyclic Operation: The appliance switches on automatically once every two hours, winding the watch in one direction (e.g. clockwise) for approx. ten minutes. After another two hours the device now automatically winds the watch in the opposite direction. Thus there is no need to know whether the automatic watch is provided with an automatic winding mechanism in clockwise or counter-clockwise direction.

10 minutes ==== 2 hours ==== 10 minutes ==== 2 hours clockwise break counter-clockwise break.

2.2. Continuous Operation (only with mains power supply): In this position the device winds the watch for 1/2 hour in one direction (e.g. clockwise). Then the direction of rotation changes and the device starts winding for 1/2 hour in the other direction. To prolong the working life of motor. It has been set an automatic off function and it will restart automatically after 11 hours.

1/2 hour breakover point 1/2 hour off automatically restart automatically clockwise no break counter-clockwise break 11 hours